Heavy Duty Thin Cutting Frame Saw (Basic)

Heavy Duty Thin Cutting Frame Saw (Basic) MAC-160

Digital controller

Heavy Duty Thin Cutting Frame Saw (Basic) MAC-160

▲ This machine allows for cutting moisturized wood materials. Height of cutting may reach 200/250/320mm.

 Saw path loss1.2~1.4mm for reducing wood material loss while increasing profit.

 Maximum feed speed up to 2.0M per minute!
 Saw frame speed up to 450~520 times per minute!

 Suitable for multiple slicing at a time.

Suitable for production of composite parquet, venetian blind, air-tight window, pencil, door and guitar, etc.

Symmetrical Structureof Saw Frame

  • The saw frame is a symmetrical construction to ensure uniform pressure on each sawblade.


  • This not only improves cutting accuracy, but extends service life of saw blade.

PLC Control

PLC Control


Entire machine motions are controlled by a high performance PLC for added convenience of operation.

Anti-tearing Device

  • Equipped plastic steel block, at first cutting the plastic steel block by the sawblades.

  • The anti-tearing device is prevent tearing out on the wood material, and ensuring the wood material integrity.

  • Anti-tearing device will be applied in the front and backward of the saw frame to reduce the hairline crack on the workpiece.


Automatic Lubricator

  • The automatic lubricator provides lubrication to saw frame, ensuring smooth motions at all times.


  • In case of lack of oil, the machine stops automatically.


Centralized Pressure Regulations

  • Each pressure roller is equipped with an independent pressure regulator for individual air pressure adjustment.


  • All pressure regulation values are centralized for convenient adjustment and maintenance.

Saw Frame Slideways with Copper Piece


The dovetailed slideways are fitted with copper piece, and precision scraped to upgrade motion smoothness and ensure outstanding wear-resistance.



Stellite and Tungsten saw blades for option.


Feed Speed Adjustment


Maximum feed speed up to 0.3~1.2M/min

Cooling Blower


Vertical 90° to cooling the saw blades that prevent the saw blade from heat growth and wood chips are evacuated easily.

Pressure Roller Elevation Control

Front and behind of machine adopted digital displayer controls the cutting height while key in the default value on the controller, pressure roller will move to the position that you expect to achieve.

Pressure Roller Elevation Control

Temperature Controller


Attached 4 units of temperature detected controller for monitoring the slideway of machine.


Oscillation Gap Between Sawblade and Wood

  • The wood feed and saw frame oscillation are excellently controlled. This feature allows the saw frame oscillation stroke to be properly controlled.

  • In addition, cutting is not performed during the saw frame moves upward, and wood cutting is performed only when moving downward. 

  • This feature may avoid heat growth on the saw blade, while ensuring superior cutting result.

Spray system

Spray system (Optional)

  • Cut dry lumber, wet lumber, and oily lumber

  • Spray Liquid and air on saw blades to reduce heat-growth to increase the working life of saw blades

  • Prevent resinous saw-dust get stuck between saw blades to increase the accuracy and consistency of finished lamella

  • Set timer to spray liquid every 5-15min.


Frame Saw Automatic Feeding Device (Optional)

  • Working length: 400~2500mm

  • Working height: 400mm (layer 2~3piece/time)

  • Feeding quantity: 2~6piece

  • Multiple wood material preparation before the machine, boost the feeding efficiently.

  • Moving variety of length working piece by Slideway, saving labor cost.

  • PATENT NO. M534674

Side Guide Fence


When the guide fence is positioned at side, the machine can feed one workpiece for cutting. 


Side and Center Guide Fence


  • When the guides fence is positioned at side, the wood feed through the air controlled pressure roller and moves along the surface of side fence.

  • Wood width 160mm

  • Wood height 60~320mm

Center Guide Fence

  • When the guide fence is positioned in between two workpieces, the machine can feed two workpieces for cutting simultaneously.


  • When the guide fence is positioned at center, two pieces of wood feed through the air controlled pressure roller.


  • The two pieces of wood move along both sides of the center guide fence.  


  • Wood width 2*70, 20*100mm


  • Wood height 60~320mm


Multiple Feed System

  • The multiple feed system is easy to install, which enables multiple wood to be cut simultaneously.


  • Feed system configuration:
    Upon customer's requirement path numbers 4paths.


  • Wood height 60~320mm

Outstanding machining capacity reduces material loss to a minimum

Kerf  1.25~1.4 mm

Accuracy is suitable for wood height under 120mm

Smooth surface for gluing.





Tel : +886-4-25612539

Fax : +886-4-25630667

E-mail : psa@ms69.hinet.net


Copyright © 2016 MEGA MAC Woodworking Machinery Co., Ltd.  | design by megaweb