▲ This machine allows for cutting moisturized wood materials. Height of cutting may reach 200 / 250 / 320 / 400mm
▲ Saw path loss 1.2~1.4mm for reducing wood material loss while increasing profit.
▲ Maximum feed speed up to 2.0M per minute!
▲ Saw frame speed up to 450~520 times per minute!
▲ The machine is equipped with a 7.5” colorful touch-sensing screen.
▲ The machine equipped with two sets of digital controller. Also, available to equip with 5.7” Mitsubishi colorful touch-sensing screen.
▲ Suitable for multiple slicing at a time.
▲ High profitable! The servo motor drive provides high positioning accuracy while the wood material input.
Suitable for production of composite parquet, venetian blind, air-tight window, pencil, door and guitar, etc.
Personnified Design
-
Door opening design permits the operator to replace sawblade quickly. With the innovative design, it makes the operator easy to access all parts of the machine.
-
Machine adjustment, sawblade replacement and maintenance times are dramatically shortened while extending the service live of the machine.
Easily input materials, supplementary feeding material by press roller (Apply in MAC-200)
-
Easily input materials, supplementary feeding material by press roller.
-
It is different from the traditional mode feeding material by manual.
-
First press roller will transfer wood automatically as it touches the wood.
-
Six press rubber roller on the top, six transfer roller at the bottom.
-
Shorten distance roller by roller will be easily and smoothly flowing the material.
Temperature Controller
Attached 4 units of temperature detected controller for monitoring the slideway of machine.
Independently Mounted Electrical Cabinet
-
The electrical cabinet may prevents dusts or wood chips from entering to achieve dust-free performance.
-
It provides a centralized control making more convenient service for the electrical technician.
Lighting Device
A work light is mounted at the outfeed port, making it convenient for checking wood outfeed condition.
Cooling Blower
Vertical 90° to cooling the saw blades that prevent the saw blade from heat growth and wood chips are evacuated easily.
Optional: 7.5inch Touch Displayer
Control pressure roller elevation
Easily input materials, supplementary feeding material by press roller. (Apply in MAC-200)
-
It is different from the traditional mode feeding material by manual.
-
First press roller will transfer wood automatically as it touches the wood.
-
Six press rubber roller on the top, six transfer roller at the bottom.
-
Shorten distance roller by roller will be easily and smoothly flowing the material.
Servo motor precision position saw frame reciprocate motion
-
Machine equipped servo motor and advanced CPU motion position controller increase cutting accuracy to enhance perfection.
-
Cutting boards while it is feeding. While saw blades moves upward, feeding roller will stop infeed material. Saw blades and material will guarantee to leave distance 3-5mm 100%.
-
The saw blades would not heat up and extend working life more than 30% on saw blades.
-
Warranty three years on machine.
Spray system (Optional)
-
Cut dry lumber, wet lumber, and oily lumber
-
Spray Liquid and air on saw blades to reduce heat-growth to increase the working life of saw blades
-
Prevent resinous saw-dust get stuck between saw blades to increase the accuracy and consistency of finished lamella
-
Set timer to spray liquid every 5-15min.
Frame Saw Automatic Feeding Device (Optional)
-
Working length: 400~2500mm
-
Working height: 400mm (layer 2~3piece/time)
-
Feeding quantity: 2~6piece
-
Multiple wood material preparation before the machine, boost the feeding efficiently.
-
Moving variety of length working piece by Slideway, saving labor cost.
-
PATENT NO. M534674
Side Guide Fence
-
When the guide fence is positioned at side, the machine can feed one workpiece for cutting.
-
Side and Center Guide Fence.
-
When the guides fence is positioned at side, the wood feed through the air controlled pressure roller and moves along the surface of side fence.
-
Wood width 160-210mm
-
Wood height 60~400mm
Center Guide Fence
-
When the guide fence is positoned in between two workpieces, the machine can feed two workpieces for cutting simultaneously.
-
When the guide fence is positioned at center, two pieces of wood feed through the air controlled pressure roller.
-
The two pieces of wood move along both sides of the center guide fence.
-
Wood width 2*70, 20*100mm
-
Wood height 60~400mm

Outstanding machining capacity reduces material loss to a minimum

Kerf 0.9~1.4mm

Accuracy is suitable for wood height under 120mm

Smooth surface for gluing
SPECIFICATIONS
