top of page
Heavy Duty Thin Cutting Frame Saw (Luxury) MAC-150 / MAC-200
CE-icon

Heavy Duty Thin Cutting Frame Saw (Luxury)
MAC-150 / MAC-200

Heavy Duty Thin Cutting Frame Saw (Luxury) MAC-150 / MAC-200

 This machine allows for cutting moisturized wood materials. Height of cutting may reach 200 / 250 / 320 / 400mm

 Saw path loss 1.2~1.4mm for reducing wood material loss while increasing profit.

 Maximum feed speed up to 2.0M per minute!

 Saw frame speed up to 450~520 times per minute!

 The machine is equipped with a 7.5” colorful touch-sensing screen.

 The machine equipped with two sets of digital controller. Also, available to equip with 5.7” Mitsubishi colorful touch-sensing screen.

 Suitable for multiple slicing at a time.

 High profitable! The servo motor drive provides high positioning accuracy while the wood material input.

 

Suitable for production of composite parquet, venetian blind, air-tight window, pencil, door and guitar, etc.

Fine tune the position of multiple guide system by handle.

Fine tune the position of multiple guide system by handle.
Strong cast iron foundation

Strong cast iron foundation

Personnified Design

 
  • Door opening design permits the operator to replace sawblade quickly. With the innovative design, it makes the operator easy to access all parts of the machine.
     

  • Machine adjustment, sawblade replacement and maintenance times are dramatically shortened while extending the service live of the machine.

Personnified Design
Symmetrical Structure of Saw Frame

Symmetrical Structure of Saw Frame

 
  • The saw frame is a symmetrical construction to ensure uniform pressure on each sawblade.
     

  • This not only improves cutting accuracy, but extends service life of sawblade.

Easily input materials, supplementary feeding material by press roller (Apply in MAC-200)
Easily input materials, supplementary feeding material by press roller (Apply in MAC-200)

Easily input materials, supplementary feeding material by press roller (Apply in MAC-200)

 

  • Easily input materials, supplementary feeding material by press roller.
     

  • It is different from the traditional mode feeding material by manual.
     

  • First press roller will transfer wood automatically as it touches the wood.
     

  • Six press rubber roller on the top, six transfer roller at the bottom.
     

  • Shorten distance roller by roller will be easily and smoothly flowing the material.

Optional : 10.4inch Touch Sensing Screen

 
  • Easily operation and change the value. An warning window display enables the operator to speed up trouble shooting.
     

  • In addition, monitor servo motor operation.

Optional : 10.4inch Touch Sensing Screen
Automatic Lubricator

Automatic Lubricator

 
  • The automatic lubricator provides lubrication to saw frame, ensuring smooth motions at all times.
     

  • In case of lack of oil, the machine stops automatically.

Centralized Pressure Regulations

Centralized Pressure Regulations

 
  • Each pressure roller is equipped with an independent pressure regulator for individual air pressure adjustment.
     

  • All pressure regulation values are centralized for convenient adjustment and maintenance.

Sawblades

 

Stellite and Tungsten saw blades for option.

Sawblades
Saw Frame Slideways with Copper Piece

Saw Frame Slideways with Copper Piece

 

The dovetailed slideways are fitted with copper piece, and precision scraped to upgrade motion smoothness and ensure outstanding wear-resistance.

Temperature Controller

Temperature Controller

Attached 4 units of temperature detected controller for monitoring the slideway of machine.

Independently Mounted Electrical Cabinet

 
  • The electrical cabinet may prevents dusts or wood chips from entering to achieve dust-free performance.
     

  • It provides a centralized control making more convenient service for the electrical technician.

Digital Positioning Control

 

The height of cut can be controlled by a digital positioning control in front and backward of the machine. Once the present position is reached, the pressure rollers elevation stops automatically.

Digital positioning control
Lighting Device

Lighting Device

 

A work light is mounted at the outfeed port, making it convenient for checking wood outfeed condition.

Cooling Blower

 

Vertical 90° to cooling the saw blades that prevent the saw blade from heat growth and wood chips are evacuated easily.

Optional: 7.5inch Touch Displayer

Control pressure roller elevation

Set up jig (Optional)

 

Moving the gauge to measure

the parallel of saw blades.

Set up jig (Optional)
Press roller is controlling by 3sets of cylinder (Apply in MAC-200)

Press roller is controlling by 3sets of cylinder

(Apply in MAC-200)

 

Supplementary feeding workpiece by initial sets of rubber pressure rollers, after rollers press 15 seconds, the initial rubber rollers will be raise up automatically to wait input materials next time.

Easily input materials, supplementary feeding material by press roller. (Apply in MAC-200)
Easily input materials, supplementary feeding material by press roller. (Apply in MAC-200)

Easily input materials, supplementary feeding material by press roller. (Apply in MAC-200)

 

  • It is different from the traditional mode feeding material by manual.
     

  • First press roller will transfer wood automatically as it touches the wood.
     

  • Six press rubber roller on the top, six transfer roller at the bottom.
     

  • Shorten distance roller by roller will be easily and smoothly flowing the material.

Servo motor precision position saw frame reciprocate motion

 
  • Machine equipped servo motor and advanced CPU motion position controller controls infeed and output rollers, saw frame stroke to increase cutting accuracy.

  • To enhance cutting results perfection, cutting boards while it is feeding. While saw blades moves upward, feeding roller will stop infeed material. Saw blades and material will 100% guarantee to leave distance 0.5-4.0mm.

  • Feeding and saw frame vertical oscillation in combination with30° of the saw frame movement effortless and oscillation smooth. In addition, wood chips are evacuated with ease, saw blades longer life, surface of lamella is smooth and highly accuracy.

Servo motor precision position saw frame move upward and backward.
Servo motor precision position saw frame move upward and backward.
Servo motor precision position saw frame move upward and backward.
Servo Motor Controlled Wood Feed
Servo Motor Controlled Wood Feed
Heavy casting aluminum saw frame carriage

Heavy casting aluminum saw frame carriage

Spray system

Spray system (Optional)

  • Cut dry lumber, wet lumber, and oily lumber

  • Spray Liquid and air on saw blades to reduce heat-growth to increase the working life of saw blades

  • Prevent resinous saw-dust get stuck between saw blades to increase the accuracy and consistency of finished lamella

  • Set timer to spray liquid every 5-15min.

Frame Saw Automatic Feeding Device

Frame Saw Automatic Feeding Device (Optional)

  • Working length: 400~2500mm
     

  • Working height: 400mm (layer 2~3piece/time)
     

  • Feeding quantity: 2~6piece
     

  • Multiple wood material preparation before the machine, boost the feeding efficiently.
     

  • Moving variety of length working piece by Slideway, saving labor cost.
     

  • PATENT NO. M534674

框鋸自動進料裝置

Side Guide Fence

 
  • When the guide fence is positioned at side, the machine can feed one workpiece for cutting.
     

  • Side and Center Guide Fence.
     

  • When the guides fence is positioned at side, the wood feed through the air controlled pressure roller and moves along the surface of side fence.
     

  • Wood width 160-210mm
     

  • Wood height 60~400mm

中靠導版

Center Guide Fence

 
  • When the guide fence is positoned in between two workpieces, the machine can feed two workpieces for cutting simultaneously.
     

  • When the guide fence is positioned at center, two pieces of wood feed through the air controlled pressure roller.
     

  • The two pieces of wood move along both sides of the center guide fence.
     

  • Wood width 2*70, 20*100mm
     

  • Wood height 60~400mm

多排送料導版

Multiple Feed System ( MAC-150 )

 
  • The multiple feed system is easy to install, which enables multiple wood to be cut simultaneously.

 

  • Feed system configuration: Upon customer’s requirement. Path numbers 4paths.
     

  • Wood height 60~400 mm

專用多排送料

Multiple Feed System ( MAC-200 )

 
  • The multiple feed system is easy to install, which enables multiple wood to be cut simultaneously.

 

  • Feed system configuration: Upon customer’s requirement. Path numbers 6paths.

 

  • Wood height 60~400mm

Outstanding machining capacity reduces material loss to a minimum

Kerf 0.9~1.4mm

Accuracy is suitable for wood height under 120mm

Smooth surface for gluing

SPECIFICATIONS

Heavy Duty Thin Cutting Frame Saw (Luxury) MAC-150 / MAC-200

MEGA MAC

台灣兆豐木工機械有限公司
MEGA MAC WOODWORKING MACHINERY CO., LTD.
Tel : +886-4-25612539
Fax : +886-4-25630667
E-mail : psa@ms69.hinet.net
Address : No. 2-6, Aly. 1, Ln. 314, Sec. 2, Yuanhuan N. Rd., Fengyuan Dist., Taichung City, Taiwan (R.O.C.)

bottom of page