▲ Reduced saw path loss for saving wood material and increasing profit.
▲ Saw frame speed up to 480 times per minute!
▲ Maximum feed speed up to 1.2M per minute!
▲ Saw path loss 1.25~1.4mm for reducing wood material loss while increasing profit.
▲ Suitable for multiple slicing at a time.
Suitable for production of composite parquet, venetian blind, air-tight window, pencil, door and guitar, etc.
Mechanical Position
-
The wood feed and saw frame vertical oscillation in combination with30° of the saw frame movement effortless and oscillation smooth. In addition, wood chips are evacuated with ease, leading to longer blade life.
-
Flywheel rotates a circle with 360°, while it rotates downward180°, the machine input material. In contrary, it rotates upward 180°, the saw blade left wood material 0.1~0.7mm and stop input material.
-
In order to optimize cutting effect, wood feeds only while the saw blade is moving downward. Wood feed stops when the saw blade moves upward.
Spray system (Optional)
-
Cut dry lumber, wet lumber, and oily lumber
-
Spray Liquid and air on saw blades to reduce heat-growth to increase the working life of saw blades
-
Prevent resinous saw-dust get stuck between saw blades to increase the accuracy and consistency of finished lamella
-
Set timer to spray liquid every 5-15min.

Frame Saw Automatic Feeding Device (Optional)
-
Working length: 400~2500mm
-
Working height: 400mm (layer 2~3piece/time)
-
Feeding quantity: 2~6piece
-
Multiple wood material preparation before the machine, boost the feeding efficiently.
-
Moving variety of length working piece by Slideway, saving labor cost.
-
PATENT NO. M534674
Side Guide Fence
When the guide fence is positioned at side, the machine can feed one workpiece for cutting.
Side and Center Guide Fence
-
When the guides fence is positioned at side, the wood feed through the air controlled pressure roller and moves along the surface of side fence.
-
Wood width 160mm
-
Wood height 60~200mm
Center Guide Fence
-
When the guide fence is positoned in between two workpieces, the machine can feed two workpieces for cutting simultaneously.
-
When the guide fence is positioned at center, two pieces of wood feed through the air controlled pressure roller. The two pieces of wood move along both sides of the center guide fence.
-
Wood width 2*70mm
-
Wood height 60~200mm

Outstanding machining capacity reduces material loss to a minimum

Kerf 1.25~1.4 mm

Accuracy is suitable for wood height under 120 mm
